Fishing is a favorite hobby for many people. Making your own fishing lures can be even more fun. In this guide, you will learn how to make a silicone mold for fishing lures.
Credit: m.youtube.com
Materials You Will Need
- Original fishing lure
- Silicone rubber
- Mixing container
- Stirring stick
- Release agent
- Measuring cups
- Cardboard or plastic box
- Plasticine clay
- Gloves
- Mask (optional)
Credit: www.amazon.com
Step-by-Step Instructions
Step 1: Prepare Your Work Area
Find a clean and dry area to work. Cover the surface with newspaper or plastic sheet. This will protect the surface from spills.
Step 2: Prepare The Lure
Take the original fishing lure. Clean it well to remove any dirt or oil. This will help in making a perfect mold.
Step 3: Create A Mold Box
Use a cardboard or plastic box to make a mold box. The box should be larger than the lure. This will hold the silicone rubber.
Step 4: Place The Lure In Clay
Press the lure halfway into the plasticine clay. Make sure the clay holds the lure firmly. The top half of the lure should be visible.
Step 5: Apply Release Agent
Spray or brush a release agent on the lure and clay. This will help to remove the lure easily from the mold later.
Step 6: Mix The Silicone Rubber
Put on gloves. Measure the silicone rubber components using measuring cups. Pour them into the mixing container. Stir well with a stirring stick until mixed.
Step 7: Pour The Silicone
Pour the silicone rubber slowly over the lure and clay. Start from one corner and let it flow. This will reduce air bubbles. Cover the lure completely.
Step 8: Let It Cure
Let the silicone rubber cure. This may take several hours. Follow the instructions on the silicone rubber package. Do not touch the mold while it cures.
Step 9: Remove The Mold
After curing, remove the mold box. Carefully peel away the clay. Then, slowly remove the original lure from the silicone mold.
Step 10: Trim The Mold
Use a sharp knife or scissors to trim any excess silicone. This will make the mold neat and ready for use.
Tips for Better Results
- Work in a well-ventilated area.
- Follow safety instructions on silicone rubber.
- Use gloves and a mask if needed.
- Take your time to avoid mistakes.
Frequently Asked Questions
What Materials Do I Need To Make A Silicone Mold?
You need silicone rubber, a mixing container, and a mold box.
How Long Does Silicone Mold Take To Cure?
Silicone molds usually take about 24 hours to cure fully.
Can I Reuse Silicone Molds For Fishing Lures?
Yes, silicone molds are reusable if handled with care.
How Do I Create A Mold Box?
Use a container slightly larger than your lure to create a mold box.
Conclusion
Making a silicone mold for fishing lures is a fun activity. It allows you to create custom lures. Follow these steps carefully for the best results. Enjoy your fishing with custom-made lures!
